Refereed Journal Articles
· Hu, J., Y. K. Chou, and R.G. Thompson, "Nanocrystalline Diamond Coating
Tools for Machining High-strength Al Alloys," International Journal of Refractory
Metals and Hard Materials, 26,
pp. 135-144, 2008.
· Hu, J., Y. K. Chou, R. G. Thompson, J. Burgess, and
S. Street, "Characterizations of
Nanocrystalline Diamond Coating Cutting Tools,” Surface and
Coatings Technology, 202, pp.
1113-1117, 2007.
· Liu, J. and Y.K. Chou, "Cutting Tool Temperature Analysis
in Heat-pipe Assisted Composite Machining," ASME Transactions, Journal of Manufacturing Science and Engineering,
129, pp. 902-910, 2007.
· Hu, J. and Y. K. Chou, "Characterizations of
Cutting Tool Flank Wear-land Contact," Wear,
263, pp. 1454-1458, 2007.
· Hu, J., Y. K. Chou, and R. G. Thompson, "On Stress Analysis of Diamond
Coating Cutting Tools," Transactions
of NAMRI/SME, 35, pp. 177-184,
2007.
· Huang, Y., Y. K. Chou, and S. Y. Liang, " CBN
Tool Wear in Hard Turning: A Survey on Research Progress," International Journal of Advanced Manufacturing
Technology, 35, pp. 443-453,
2007.
· Liu, J. and Y. K. Chou, "On Temperatures and Tool Wear in
Machining Hypereutectic Al-Si Alloys with Vortex-tube Cooling," International Journal of Machine Tools and
Manufacture, 47 (3-4), pp.
635-645, 2007.
· Zhang, Y. and Y. K. Chou, "Three-dimensional
Finite Element Analysis Simulations of the Fused Deposition Modelling Process,"
Journal of Engineering Manufacture, 220 (10), pp. 1663-1671, 2006.
· Chou, Y. K. and J. Liu, "CVD Diamond Tool Performance in
Composite Machining," Surface
and Coatings Technology, 200,
pp. 1872-1878, 2005.
· Mahajan, V. and Y. K. Chou, "Machining-induced
Surface Hardening due to Large Wear-land," Journal of Engineering
Manufacture, 218 (12), pp.
1647-1655, 2004.
· Chou, Y. K. and H. Song, "Thermal Modeling for White Layer
Predictions in Finish Hard Turning," International Journal of
Machine Tools and Manufacture, 45 (4-5),
pp. 481-495, 2005.
· Chou, Y. K. and J. Liu, "Ion Implantation of
Superhard Ceramic Cutting Tools," Journal of Materials Engineering and
Performance, 13 (4), pp. 398-405, 2004.
· Guo, Y. B. and Y. K. Chou, "Ploughing Force
Determination and Influence on Material Properties in Metal Cutting," Journal
of Materials Processing Technology, 148 (3), pp. 368-375, 2004.
· Nama, S. C., Y. K. Chou, and J. M. Simmons, "A Preliminary Investigation on
Metrology Aspects in Rapid Prototyping," Transactions of NAMRI/SME,
32, pp. 605-612, 2004.
· Chou, Y. K. and Song, H., "Tool Nose
radius Effects on Finish Hard Turning," Journal
of Materials Processing Technology, 148(2), pp. 259-268,
2004.
· Chou, Y. K. , "Hard Turning of M50 Steel
with Different Microstructures in Continuous and Intermittent Cutting," Wear, 255(7-12), pp. 1388-1394, 2003.
· Chou, Y. K. and Song, H., "N2+ Implanted Cubic Boron Nitride Tools for Finish Hard
Machining," Transactions of NAMRI/SME,
30, pp. 353-360, 2002.
· Chou, Y. K., Barash, M. M.and Evans, C. J.,
"Experimental Investigation on CBN Turning of Hardened AISI 52100
Steel," Journal of Materials
Processing Technology, 124(3), pp. 274-283, 2002.
· Chou, Y.
K., "Surface Hardening of 4340 Steel by Machining-A Preliminary
Investigation," Journal of Materials
Processing Technology, 124(1-2), pp. 171-177, 2002.
· Chou, Y. K. and Evans, C. J., "White Layers and
Thermal Modeling of Hard Turned Surfaces," International Journal of Machine Tools and Manufacture, 39(12),
pp. 1863-1881, 1999.
· Chou, Y. K. and Evans, C. J., "CBN Tool Wear in
Interrupted Hard Cutting," Wear,
225(1), pp. 234-245,
1999.
· Chou, Y. K. and Evans, C. J., "Process
Effects on White Layer Formation in Hard Turning," Transactions of NAMRI/SME, 26, pp. 117-122, 1998.
· Chou, Y. K. and Evans, C. J., "Tool Wear Mechanism in Continuous
Cutting of Hardened Tool Steels," Wear,
212(1), pp. 59-65,
1997.
· Chou, Y.
K. and Evans, C. J., "Finish Hard Turning of Powder Metallurgy M50
Steel," Transactions of NAMRI/SME,
25, pp. 81-86, 1997.
· Davies, M. A., Chou, Y. K. and Evans, C. J., "On Chip Morphology, Tool Wear and
Cutting Mechanics in Finish Hard Turning," Annals of the CIRP, 45(1),
pp. 77-82, 1996.
Conference Papers
· Hu, J., Y. K. Chou, and R.G. Thompson, "Cutting Edge Radius effects on
Diamond Coated Cutting Tools: from Deposition to Machining," 2007 ASME
International Manufacturing Science and Engineering Conference (MSEC),
· Hu, J., Y. K. Chou, and R.G. Thompson,
"Nanocrystalline Diamond Coated Cutting Tools," Material Science
& Technology 2007 Conference and Exhibition (MS&T’07),
· J. Hu, R.G. Thompson, and Y. K. Chou, "Modeling
Stress Evolutions in Nanocrystalline Diamond Coating Tools in Machining,"
18th Annual Advanced Aerospace Materials and Processes Conference &
Exhibition (AeroMat), Baltimore, MD, June 25-28, 2007.
· Zhang, Y.
and Y. K. Chou, "3D FEA Simulations of Fused Deposition Modeling
Process," ASME International Manufacturing Science and Engineering
Conference,
· Nama, S.
C., Y. Zhang, and Y. K. Chou, "On Part Error Behavior in the
Multi-jet Rapid Prototyping Process," Advances in Materials and
Processing Technologies 2006,
· Hu, J.,
H. Song, and Y. K. Chou, "3D
Analytical Cutting Force Simulations in Worn Tool Machining, Application to
Finish Hard Turning," Advances in Materials and Processing
Technologies 2006, Las Vegas, NV, July 30 – August 3, 2006.
· Zhang, Y.
and Y. K. Chou, "A
Parametric Study of Part Distortions in FDM Using 3D FEA," The
Proceedings of 17th Solid Freeform Fabrication Symposium, Austin,
TX, August 14-16, pp. 410-420, 2006.
· Zhang, Y.
and Y. K. Chou, "3D FEA
study of Part Distortions in Layered Manufacturing," Rapid Prototyping
and Manufacturing 2006, Chicago, IL, May 23-25, 2006.
· Liu, J.
and Y. K. Chou, "An Investigation on Cutting Tool Temperatures in
Composite Machining Assisted with Heat-pipe Cooling," ASME IMECE, Orlando,
Florida, November 6-11, IMECE2005-80323, 2005.
· Liu, J.
and Y. K. Chou, "Vortex-tube Cooling for Tool Wear Reduction in A390 Dry
Machining," ASME World Tribology Congress, Washington, D.C., September
12-16, WTC2005-64166, 2005.
· Chou, Y.
K. and H. Song, "Thermal Modeling for Finish Hard Turning Using a Worn
Tool," Proceedings of JUSFA (Japan-USA Symposium on Flexible Automation),
ASME, UL_014, Denver, CO, July 19-21, 2004.
· Chou, Y.
K. and Song, H., "Thermal Modeling for Finish Hard Turning Using a
New Tools," ASME IMECE, Manufacturing Science and Engineering,
IMECE-41765, 2003.
· Chou, Y.
K. and Song, H., "Hard Turning with Different Nose-Radius Ceramic
Tools," SME Technical Paper,
MR01-228, 2001.
· Chou, Y.K., "Machining as an Alternative to
Surface Hardening of Steel Parts-A Preliminary Investigation," Proceedings of the 19th Heat Treating Society
Conference (Heat Treating Including Steel Heat Treating in New Millennium),
pp. 245-250, 2000.
· Chou, Y. K. and C. J. Evans, "White Layers and
Thermal Modeling of Hard Turned Surfaces," Proceedings of ASME IMECE, Manufacturing Science and Engineering, MED,
6-2, pp. 75-82, 1997.
· Chou, Y.
K. and C. J. Evans, "Microstructural Effects in Precision Hard
Turning," Proceedings of ASME IMECE (International Mechanical Engineering
Conference and Exposition), Manufacturing
Science and Engineering, MED, 4, pp. 237-242, 1996.
· Chou, Y.
K., M. M. Barash, and C. J. Evans, "Finishing Performance and Wear
Mechanisms of Cubic Boron Nitride Tools in Turning of Hardened 52100
Steel," Ceramic Industry Manufacturing
Conference and Exposition,
· Chou, Y.
K. and M. M. Barash, "Review on Hard Turning and CBN Cutting Tools,"
Proceedings of the First International
Machining & Grinding Conference, Detroit, MI, Spe.1995, pp.
949-962, 1995.