Education:

Other Related Experience:

• NASA-ASEE Summer Faculty Fellow, NASA, Marshall Space Flight Center, Huntsville, AL, 5/93 - 7/93, 5/87 - 7/87, 5/86 - 7/86.
• Technical Consultant, CCSports Associates, New Haven, CT, 11/87 - present
• Mechanical Engineer, Research and Development Department Badische Corporation, Anderson SC (now Fibers Division of BASF Corporation), 6/78 - 8/81.

Professional Affiliations:

• Associate Member ASME.
• Member SAE, ASEE

Instructional Activities:

• Undergraduate Courses- Instrumentation, Control Systems, Introduction to Engineering, Introduction to Mechanical Engineering, Dynamic Systems, Dynamics of Machinery
• Graduate Courses- Modern Controls

Research Activities:

Electro-mechanical system design, including development and application of microprocessor-based controls to a variety of mechanical systems, including natural gas fuel systems for diesel and spark-ignited engines, variable speed ground source heat pump systems, feeding aids for the physically challenged, and electro-mechanical actuators for space applications.

Refereed Publications [1995-1999]

• Sung Y.G. and J.K. Parker, Frequency Dependent Krylov Vectors for Second-Order Damped Systems, KSME International Journal, Vol. 13, No. 11, October, 1999.
• Woodbury, K. A., Chen, Y., Parker, J. K., and Piwonka, T. S., Measurement of Interfacial Heat Transfer Coefficients between Aluminum Castings and Resin-bonded Sand Molds, AFS Transactions, No. 98-116, pp. 705-711, 1998.
• Macari, E.J, J. Parker and N. Costes, Measurement of Volume Changes in Triaxial Tests Using Digital Imaging Techniques, Geotechnical Testing Journal, GTJODJ, American Society of Testing and Materials, Vol 20, March, 1997.
• Wander, J., V. Byrd, and J. Parker, Initial Disturbance Accomodating Control System for Prototype Electromechanical Space Shuttle Steering Actuator, Proceedings of the 1995 American Controls Conference, Seattle, WA, June 1995.
• Byrd, V.T., J.K. Parker, and J. Wander, Model Development and Simulation of an Electromechanical Thrust Vector Control Actuator Experiencing Large Magnitude Colinear Transient Forces, Proceedings of the ASME Dynamic Systems and Control Division at the 1995 International Mechanical Engineering Congress and Exposition, San Francisco, CA. November, 1995.

Conference Papers And Presentations [1995-1999]

• Corleto, C., J. Froyd, P. K. Imbrie, J. Parker, J. Richardson, R. Roedel, Freshman Design Projects in the Foundation Coalition, Proceedings of the Frontiers in Education 28th Annual Conference, CD-ROM, Paper T1D, Tempe, AZ, November, 1998.
• Midkiff, C., B. Todd, J. Parker, M. Barkey, and J. Gershenson, Delivery of a Complete Undergraduate Engineering Degree by Distance Learning Using a Mobile Laboratory, Proceedings of the 1998 ASEE Southeastern Section Conference , Orlando, FL, April 1998.
• Parker, J. and G. Ferguson, Mechanical Systems Curriculum Revision at The University of Alabama, Proceedings of the 1997 ASEE Southeastern Section Conference, pp. 163-167, Marietta, GA, March, 1997.
• Cuttino, J., J. Parker and K. Woodbury, Collaborative Report Writing: Reducing Student Load While Maximizing Outcomes, Proceedings of the 1997 ASEE Southeastern Section Conference, pp. 168-174, Marietta, GA, March, 1997.
• Midkiff, C., J. Parker and S. Bell, Mechanical Engineering Curriculum Reform at The University of Alabama, Proceedings of the 1997 ASEE Southeastern Section Conference, pp. 150-156, Marietta, GA, March, 1997.
• Parker, J., J. Richardson, D. Cordes, The Foundation Coalition Freshman Year : Lessons Learned, Proceedings of the Frontiers in Education 26th Annual Conference, CD-ROM, IEEE Catalog No. 96CH35946, Paper 8C5.4, Salt Lake City, UT, November, 1996.
• Parker, J., C. Midkiff, S. Kavanaugh, Capstone Senior Design at The University of Alabama, Proceedings of the Frontiers in Education 26th Annual Conference, CD-ROM, IEEE Catalog No. 96CH35946, Paper 6C4.1, Salt Lake City, UT, November, 1996.
• Parker, J. and D. Schinstock, Introduction to Hydraulic and Logic Systems in a Controls Course, 1996 ASEE Annual Conference Proceedings, CD-ROM, Paper 3266, Washington, DC, June, 1996.
• Parker, J. and S. Kavanaugh, Competitive Design Projects at The University of Alabama, Proceedings of the 1996 ASEE Southeastern Section Conference, pp. 54-59, Gatlinburg, TN, April, 1996.
• Parker, J., J. Richardson, and D. Cordes, Problem Solving and Design in the Freshman Year: The Foundation Coalition, Proceedings of the 1996 ASEE Southeastern Section Conference, pp. 286-291, Gatlinburg, TN, April, 1996.
• Parker, J., D. Cordes, C. Laurie, A. Hopenwasser, J. Izatt, and D. Nikles, Curriculum Integration in the Freshman Year at The University of Alabama - Foundation Coalition Program, Proceedings of the Frontiers in Education 25th Annual Conference, Atlanta, GA, November, 1995.
• Parker, J., D. Cordes, J. Richardson, Engineering Design in the Freshman Year at The University of Alabama - Foundation Coalition Program, Proceedings of the Frontiers in Education 25th Annual Conference, Atlanta, GA, November, 1995.
• Cordes, D., J. Parker, D. Nikles, C. Laurie, A. Hopenwasser, and J. Izatt, Teaming In Technical Courses, Proceedings of the Frontiers in Education 25th Annual Conference, Atlanta, GA, November, 1995
• Byrd, V.T., and J.K. Parker. 1995. Status Report: Force Feedback Compensation for Electromechanical Actuation in Thrust Vector Control, Proceedings of the 1995 ASME Southeast Region XI Graduate Student Technical Conference, Tampa, FL. May 5-6, 1995. pp. 21-23.

Service Activities:

• Chair, UA Undergraduate Programs and Services Committee
• Member of UA NSF Foundation Coalition Team