Mechanical Engineering
lim.jpg (108747 bytes)  

Teik C. Lim
Associate Professor

 
Education Teaching Research Service personal.gif (1207 bytes)

Education:

Degree Major Institution Date
Ph.D. Mechanical Engineering Ohio State University 1989
M.S. Mechanical Engineering University of Missouri-Rolla 1986
B.S. Mechanical Engineering Michigan Technological University 1985

Other Related Experience:

  • Adjunct Assistant Professor, Dept. of Mechanical Engineering, The Ohio State University (1987-)
  • Research Scientist, Center for Automotive Research, The Ohio State University (1996-1998)
  • Senior Project Engineer, Structural Dynamics Research Corporation (1992-1996)
  • Project Engineer, Structural Dynamics Research Corporation (1989 – 1992)

Professional Affiliation and Service:

  • Faculty Advisory Committee, Ohio State Center for Automotive Research (1996-1998)
  • Co-organizer and Chair, Driveline Session (14 refereed conference papers), SAE Noise and Vibration Conference and Exposition (1997)
  • Member, Institute of Noise Control Engineering (INCE) (since 1989)
  • Associate Member, ASME, ASA and SAE (since 1990)
  • Reviewed articles for JSV, NCEJ, ASME, SAE, IEEE and Applied Acoustics publications.

Instructional Activities:

  • Digital Signal Analysis of Mechanical Systems
  • Noise Quality Analysis Techniques
  • Advanced Dynamics of Machinery
  • Fundamentals of Acoustics

Research Activities: Dynamics, Acoustics, Machinery Noise & Vibration Control, and Sound Quality Techniques

Principal Publications for Last Five Years:

  • "Computation of normalized dynamic mesh force and motion transmissibility spectra for vibration control of roots-type supercharger system," Teik C. Lim, Noise Control Engineering Journal, 46(3), pp 120-131, 1998.
  • "Dynamic analysis of layshaft gears in automotive transmission," Teik C. Lim and D.R. Houser, Journal of Passenger Cars, 106(6), 1997.
  • "Finite element and experimental modeling approaches for automotive noise control problems," Teik C. Lim, Noise Control Engineering Journal, 44(5), pp 245-248, 1996.
  • "Vibration transmission through rolling element bearings. Part V: Effect of distributed load on roller bearing stiffness matrix," Teik C. Lim and R. Singh, Journal of Sound and Vibration, 169(4), pp 547-553, 1994.
  • "Dynamic analysis of high speed hypoid gears with emphasis on automotive axle noise problem," Yuping Cheng and Teik C. Lim, Proceedings of the ASME Power Transmission and Gearing Conference, DETC98/PTG-5784, Atlanta, Georgia, 1998.
  • "On the annoyance factors of power window regulator sounds," Teik C. Lim and R.D. Shadden, Proceedings of the 1998 Sound Quality Symposium, pp 125-130, Ypsilanti, Michigan, 1998.
  • "Automotive applications for test/analysis correlation," M.G. Donley and Teik C. Lim, Proceedings of the SAE Noise and Vibration Conference, Traverse City, Michigan, Paper No. 951366, pp 1079-1085, 1995.
  • "Mid-frequency range vibro-acoustic simulation using frequency response technique," Teik C. Lim, Proceedings of the International Conference on Noise Control Engineering, Newport Beach, California, pp 1209-1212, 1995.

Honors & Awards:

  • Best Technical Presentation Award, SDRC 7th Technology Conference (1991)
  • Sole entry to represent The Ohio State University in the Council of Graduate
  • SchoolsUniversity Microfilms International Distinguished Dissertation Award competition (1991)
  • The Ohio State University Presidential Fellowship (1989)
  • The University of Missouri-Rolla Faculty Research Grant (1986)
  • Michigan Technological University Undergraduate Student Merit Scholarship (1983-1985)
  • Dean’s List (Top Student), Michigan Technological University (1984-1985)